Microcontroller Embedded C Programming: Absolute Beginners

==>  Microcontroller Embedded C Programming: Foundations for Firmware Engineers <==

This should be your very first course to dive into the exciting world of "Embedded Systems

This is our new course mainly targeted for absolute beginners to learn microcontroller programming using the 'C ' programming language.

Please note that "Embedded C" is NOT a separate programming language. 'Embedded C' is rather embedded target aware programming using traditional 'C' programming language. In this course you work closely with hardware such as registers, peripherals, interrupts, and real time constraints.

Some of the critical microcontroller-related 'C' concepts such as

1. Importance of bitwise operators

2. Usage of bit manipulation techniques to program MCU peripheral registers

3. accessing memory-mapped registers using pointers

4. pointers and casting

5. structures, bitfields, unions, and bit extraction techniques

6. representing hardware registers details and configuring them using 'C' structure definitions

7. Usage of const and volatile type qualifiers

8. Interpret complex variable definitions involving the combination of const and volatile

9. The precise usage of const pointers, const data, volatile const, with pointer and non-pointer variables

10. The behavior of the code during compiler optimization and solution using volatile

11. Functions and friends

12. Data types, variables definitions, storage class specifiers and much more

13. Loops: while, for, do. while

14. MCU internal architecture and programming peripherals

15. Interfacing projects

All these concepts are discussed with clear examples and writing code for the target embedded board.

According to 2017 embedded dot com survey still 'C' is one of the most widely used programming languages  for embedded code development

This course gives particular emphasis to learn 'C' programming concepts practically for microcontroller use cases.

Hardware:

1. You need ARM Cortex M4 based STM32F407 DISCOVERY board from ST if you want to try out code on the target.

2. Additional interfacing components may be required for interfacing projects

3. You can also be able to follow this course if you have any other boards from ST such as Nucleo or evaluation.

Software:

1. In this course, Eclipse-based STM32CubeIDE is used as the  IDE ( works on Windows/Linux/Mac) (FREE)

Learning order of FastBit Embedded Brain Academy Courses,

If you are a beginner in the field of embedded systems, then you can take our courses in the below-mentioned order.
This is just a recommendation from the instructor for beginners.

1) Microcontroller Embedded C Programming: absolute beginners(Embedded C)

2) Embedded Systems Programming on ARM Cortex-M3/M4 Processor(ARM Cortex M4 Processor specific)

3) Mastering Microcontroller with Embedded Driver Development(MCU1)

4) Mastering Microcontroller: TIMERS, PWM, CAN, RTC,LOW POWER(MCU2)

5) Mastering Microcontroller: STM32-LTDC, LCD-TFT, LVGL(MCU3)

6) Embedded System Design using UML State Machines(State machine)

7) Mastering RTOS: Hands-on FreeRTOS and STM32Fx with Debugging(RTOS)

8) ARM Cortex M Microcontroller DMA Programming Demystified(DMA)

9) STM32Fx Microcontroller Custom Bootloader Development(Bootloader)

10) Embedded Linux Step by Step using Beaglebone Black(Linux)

11) Linux device driver programming using Beaglebone Black(LDD1)

Other programming courses

1) Mastering Embedded Rust: Bare Metal, FFI, Crates, Projects (STM32+Rust)

2) Master The Rust Programming Language : Beginner To Advanced